Inspinia 4″ SQ
INS4 SQ · Touch panel
A 4″ room controller for the wall. It runs the Inspinia application on Linux, measures room humidity and temperature on board, and takes power and network over one PoE cable or 24 V DC.
- IPS · 480 × 480
- 4″
- BMS points
- 1000
- UI objects
- 200
- Max. consumption
- 5 W
At a glance
Square 4″ IPS
480 × 480 at 400 cd/m², with a five-point capacitive touchscreen.
Room logic on board
Linux 3.4 with the Inspinia application: up to 200 UI objects and 1000 BMS points. Initial licence 200 BMS points.
Measures the room
Built-in humidity (0–100% RH) and temperature (−40 °C to +125 °C) sensors.
PoE or 24 V DC
IEEE 802.3af on the LAN port, or 24 V DC in. Maximum 5 W.
Specification
As published in the datasheet.
Hardware and software
- Processor
- ARM A7 single-core 1.2 GHz
- Memory
- 128 MB DDR3 RAM
- Storage
- 2 GB SD flash
- Software
- Linux 3.4 with the Inspinia application
- Capacity
- Up to 200 UI objects and 1000 BMS points
- Initial licence
- 200 BMS points · no HVAC (VRV/VRF) points
Display
- Panel
- IPS 4″
- Resolution
- 480 × 480
- Luminance
- 400 cd/m²
- Touch
- 5-point capacitive
Power
- Input
- 24 V DC
- PoE
- IEEE 802.3af
- Consumption
- Max. 5 W
Standard interfaces
- LAN
- 1× RJ45 10/100 Mbps (PoE)
- Add-on
- 1× add-on port
- Digital out
- 1× (5 V DC)
- Digital in
- 1×
Built-in sensors
- Humidity
- 0% to 100% RH
- Temperature
- −40 °C to +125 °C
Environment
- Operating temperature
- −10 °C to +60 °C
- Operating humidity
- 5% to 90% at 25 °C
Rear terminals
The terminal bank is on the back of the panel and must remain reachable in the back box.
- Add-on bus− · +
- 24 V DC+ · −
- EthernetRJ45 10/100 Mbps · PoE 802.3af
- I/O (5 V DC)C · 5V · I
- Add-on portOptional interface module
Integrations
Optional interface modules fit the add-on port and bring the building’s buses and climate systems onto the same controller.
A-KNXKNX TP
A-SCSBticino (SCS) TP
A-iBUSiNELS Bus TP
A-GRS4Galvanic isolated RS485 Modbus
VRV / VRFOne add-on per AC brand · order codes below
A-ZGBZigbee 3.0
VRV / VRF port connection
| Brand | Order code | Ports | Protocol | IDU | ODU |
|---|---|---|---|---|---|
| Daikin | A-VDK | F1 · F2 | D3 NET | 64 | 16 |
| Hitachi · Hisense | A-VHT | 1 · 2 | TCC LINK | 64 | 16 |
| LG · Arçelik | A-VLG | A · B | INTER A-B | 64 | — |
| Mitsubishi Electric | A-VME | M1 · M2 | M-NET (TB3/7) | 50 | 10 |
| Mitsubishi Heavy | A-VMH | A · B | SLINK I/II | 64 | — |
| Panasonic · Sanyo | A-VPA | U1 · U2 | S3 NET | 64 | — |
| Samsung | A-VSM-F | F1 · F2 / R1 · R2 | NASA | 64 | 16 |
| Toshiba | A-VTO | U1 · U2 | TCC LINK | 64 | 16 |
Indoor (IDU) and outdoor (ODU) unit counts are subject to limits set by the manufacturer. VRV/VRF add-ons always operate as the primary master central controller.
Bus connection
| Bus | Ports | Protocol |
|---|---|---|
| iNELS | + · − | iNELS Bus |
| KNX | + · − | KNX TP |
| Modbus | A · B · G | RS485 |
| bticino | + · − | SCS Bus |
Dimensions and mounting
- Front
- 92.00 × 92.00 mm with metal frame
- Back box
- EU standard 1G, round · Ø 72.50 × 68.00 mm · 61.00 mm deep
- Mounting plate
- 74.00 mm · screw pitch 60.00 mm
- Installation
- Box face flush with the finished wall
Ordering and documents
- INS4SQInspinia SQ 4″ Room Controller
The metal frame is an optional trim: without frame, Silver, Gold or Black.
- DatasheetDatasheet — Inspinia 4″ SQ, opens in a new tab
- ConformityCE
Also in touch panels
- Inspinia 8″ SQINS8 SQView product
- Inspinia 10″ SQINS10 SQView product
Start with the specification.
Send the protocol, the room count, and the panel sizes. We reply with a specification.