Hero, Black bar

An 10″ touch panel for the wall, used horizontally. It runs the Inspinia application on Android 7.1, carries two speakers, a microphone input and dry-contact outputs, and takes power over PoE (802.3at) or 24 V DC.

IPS · 1280 × 800
10″
BMS points
2000
UI objects
1000
Max. consumption
14 W

At a glance

10″ IPS, 1280 × 800

300 cd/m² with five-point capacitive touch, in horizontal working mode.

The building on one screen

Quad-core 1.2 GHz, 1 GB RAM, 8 GB flash. Up to 1000 UI objects and 2000 BMS points; initial licence 500 BMS points.

Audio on board

Two 2 W speakers and a microphone input.

Contacts and infrared

Five digital inputs, two dry-contact outputs (2 A / 24 V DC) and a Uni-port for the optional six-LED infrared module.

Specification

As published in the datasheet.

Hardware and software

Processor
Quad-core 1.2 GHz
Memory
1 GB DDR3 RAM
Storage
8 GB NAND flash
Software
Android 7.1 with the Inspinia application
Capacity
Up to 1000 UI objects and 2000 BMS points
Initial licence
500 BMS points · no HVAC (VRV/VRF) points

Display

Panel
IPS 10″
Resolution
1280 × 800
Luminance
300 cd/m²
Touch
5-point capacitive
Orientation
Horizontal working mode

Power

Input
24 V DC
PoE
IEEE 802.3at
Consumption
Max. 14 W

Standard interfaces

LAN
1× RJ45 10/100 Mbps
Add-on
2× add-on ports
Digital in
5×
Digital out
2× dry contact, 2 A / 24 V DC
Uni-port
1×
Audio
2× 2 W speakers · 1× microphone input

Built-in sensors

Humidity
0% to 100% RH
Temperature
−40 °C to +125 °C

Environment

Operating temperature
−10 °C to +60 °C
Operating humidity
5% to 90% at 25 °C

Connections

The connector bank sits on the underside and must remain reachable after installation.

1234567
  1. 24 V DC⏚ · + · −
  2. EthernetRJ45 10/100 Mbps
  3. OutputsO1 · O1 · O2 · O2 — dry contact 2 A / 24 V DC
  4. InputsI1 – I5 · C
  5. Uni-portIRGW-UP infrared · 6 IR LEDs
  6. Add-on bus port 1A · B · C
  7. Add-on bus port 2A · B · C

Integrations

Optional interface modules fit the add-on port and bring the building’s buses and climate systems onto the same controller.

  • KNXA-KNXKNX TP
  • bticinoA-SCSBticino (SCS) TP
  • iNELSA-iBUSiNELS Bus TP
  • ModbusA-GRS4Galvanic isolated RS485 Modbus
  • VRFVRV / VRFOne add-on per AC brand · order codes below
  • ZigbeeA-ZGBZigbee 3.0
  • IRGW-UPInfrared · Uni-port, 6 IR LEDs

VRV / VRF port connection

BrandOrder codePortsProtocolIDUODU
DaikinA-VDKF1 · F2D3 NET6416
Hitachi · HisenseA-VHT1 · 2TCC LINK6416
LG · ArçelikA-VLGA · BINTER A-B64—
Mitsubishi ElectricA-VMEM1 · M2M-NET (TB3/7)5010
Mitsubishi HeavyA-VMHA · BSLINK I/II64—
Panasonic · SanyoA-VPAU1 · U2S3 NET64—
SamsungA-VSM-FF1 · F2 / R1 · R2NASA6416
ToshibaA-VTOU1 · U2TCC LINK6416

Indoor (IDU) and outdoor (ODU) unit counts are subject to limits set by the manufacturer. VRV/VRF add-ons always operate as the primary master central controller.

Bus connection

BusPortsProtocol
iNELS+ · −iNELS Bus
KNX+ · −KNX TP
ModbusA · B · GRS485
bticino+ · −SCS Bus

Dimensions and mounting

Front
287.00 × 174.60 mm
Depth
61.00 mm at the body · 64.45 mm overall
Back box recess
307.00 × 194.60 mm
287174.6
Front · mm

Ordering and documents

  • INS10SQ.SSilver bars
  • INS10SQ.GGold bars
  • INS10SQ.BBlack bars
  • Code pendingPink, Copper, Bronze, Red

The finish is the brushed aluminium side-bar trim; the panel is the same.

Start with the specification.

Send the protocol, the room count, and the panel sizes. We reply with a specification.

Request a quoteFind a certified installer